SIM Card Personalization Machine YSCP-1
1. Introduction of SIM Card Personalization Machine YSCP-1
SIM Card Personalization Machine YSCP-1 is applicable for writing the sequential requirement data such as smart card personalized data and it can also be used for laser number marking. The equipment is developed with module design. The card writing head and laser engraving unit can be flexibly supplied according to customer requirements.
2. Basic configuration of SIM Card Personalization Machine YSCP-1
- 16 work stations(including 64 writing heads available for both 2-chip card and 4-chip card)
- 2 industrial control host computers
- 2 Loaders and 2 unloaders(4×500 cards)
- 1 reject box
- 3 dual-station flippers (2-side laser marking and collection card surface selection function)
- 2 laser engraving units
- 1 TP-LINK (48 interfaces) switch
3. Speed and data downloading time of SIM Card Personalization Machine YSCP-1
X axis is time,Y axis is speed,the time at inflexion is 8.8s. when the downloading time is 24.8s,the speed is 2000 cards/h.
4. Speed and laser marking time of SIM Card Personalization Machine YSCP-1
X axis is time,Y axis is speed,the time at inflexion is 0.39s,when the marking time is 1.6s,the speed is 1800 cards/h.
The SIM Card Personalization Machine YSCP-1 is also named as SIM Card Data Encoder and Laser Engraving Machine , SIM Card Perso Line YSCP-1.
5. Technical parameters of SIM Card Personalization Machine YSCP-1
| Dimension | 3.6 m×0.8m×1.90 m |
| Weight | About 1000kg |
| Power | 220V, 50Hz, 3KW(machine),3.6KW(Laser) |
| Air pressure | 0.5Mpa 10L/min |
Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, the condition of building factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well communication with each other
Guarantee
(1)We can supply one year guarantee period for our card machines, if the client have any question ,they could contact our service department any time ,we will supply efficient service .
(2)Within one year ,if the client meet the unsolvable questions ,we can make site supporting.
Product Tags:
|
|
SIM Card Data Encoder and Laser Engraving , SIM Chip Card Personalization Machine Images
|
